Connect Using WPA2-Enterprise with Windows

Connect Using WPA2-Enterprise with Windows XP (SP3)

Note: Your computer must have Windows XP Service Pack 3 (SP3) installed.

1. Right-click the Wireless Network icon in the taskbar, and choose View Available Wireless Networks:
   
   
2. In the left column under Related Tasks, click Change the order of preferred networks. The Wireless Network Connection Properties window will open to the Wireless Networks tab:
   
   
3. Click the Add... button located under Preferred networks.
4. The Wireless network properties window opens to the Association tab. Enter the following data, as shown in the image below:
   
   • Network name (SSID): MWireless
   • Network Authentication: WPA2
   • Data encryption: AES
   
5. Click the Authentication tab:
   
   
6. In the EAP type drop-down menu, select Protected EAP (PEAP).
7. Uncheck Authenticate as computer when computer information is available.
8. Click the Properties button.
9. Check Validate server certificate.
10. Check the Connect to these servers: box and add the following:
    
    aaa-aldc-01.umnet.umich.edu;aaa-macc-01.umnet.umich.edu;aaa-sebdc-01.umnet.umich.edu
    
11. In the list of Trusted Root Certification Authorities, locate and check UTN-USERFirst-Hardware.
    
    
12. From the Select Authentication Method drop-down menu, select Secured password (EAP-MSCHAP-v2).
13. Check Enable Fast Reconnect.
14. Click Configure...
15. Uncheck Automatically use my Windows logon name and password (and domain if any):
    
    
16. Click OK to close all remaining windows.
    Note: If you are prompted to Validate Server Certificate, click OK.
17. When you are in range of a MWireless access point, you will be prompted to Enter Credentials. Enter the following data, and click OK:
    
    • User name: 
    • Password: 
    • Logon domain: 

You should now be connected to MWireless.

If you are still unable to connect after following the above instructions, contact the ITS Service Center at 764-HELP.